Your own solar panels

What’s all this about building your own solar panels? Think about this.the sun is shining down, yet the only cloud in the sky is your electricity bill!
Have you ever really considered the idea of building your own solar panels? I suggest that you open your mind to it and this article contains a few tips that will be helpful.

YOUR NEXT DO-IT-YOURSELF PROJECT. INSTALLING YOUR OWN SOLAR PANELS!

Firstly, check out the specials online for materials. This can greatly save on construction costs. Many suppliers will offer all that is needed to complete the task, including plans and advice on how to assemble them.

The Tools you Need.

The tools that you will need will most certainly be found in your workshop, and they include hammer, saw, ,soldering iron, screwdrivers and a knife.
For your own solar panels you will need a few more things, but most people have some extra timber to make the frame for mounting the panels to the roof and also screws and wood panels to make the housing for the cells.
You need to purchase the pre-tabbed photo voltaic cells and the tab wiring that you will need to connect them. Add extra glue, solder and flux as well as plastic sheeting to cover the lid of the housing to block diodes and stop the current reversal. Then, you are ready to go!

Where can I put them?

Next you will need to think carefully about where the panels are going to be sited. You will need a south-facing slope of 30° that has no shade. Make sure that it is not in the path of any four legged natural pests, and also make sure that the site allows wiring to be easily conducted into the area you choose to house the storage batteries.
When you finally decide on this easy DIY project, of building your own solar panels you should allow a weekend and also clear some space on your workshop floor so it is clean and dust free.
Once the cells are fixed to a backing board in rows,( usually 6 x 6) you will find that it is really just a simple assembly job.

Next, join the cell tabs with the wire, and then add the blocking diodes and the cable to connect up with the storage battery. Then, you can cover with a plastic lid. You then, seal up the unit using the silicone grouting.
You must mount the panels on the roof after some insulation has been put on the rear of the housing. Then to really make your own solar panels efficient paint all the housing, except the lid, black.

Can I do this on my own?

You may need a buddy to help you, because, not only is it heavy but the fact that you are working at heights is more awkward.
The whole project for making your own solar panels depends on your skill at DIY projects. Most handymen will be able to attempt it. However, if this seems a little too daunting, you can always buy a kit-set or even a complete unit. Before you buy, it is wise to check out someone who has done it or, try to see a solar powered unit in action.

Soon, it may not be an option but survival technology!

Let’s face it, times are tough now and this really is cutting-edge survival technology that will give the average homeowner, real independence when supply of power is unreliable. And, make your own solar panels project fun!